Skip to Navigation or Skip to Content

$0.00 (0) View cart

Your Cart (0 items) Checkout

TX Direct Wash In© - 300ml

Reviews

Write a review+

Please rate:
Enter your review

TX Direct Wash In© - 300ml

$29.95 (AUD)
This product is ordered directly from the supplier upon purchase and therefore order turnaround is approx. 1-2 weeks. Any queries, please contact Mailorder on Freecall Australia 1800 811 312.

Wash-in waterproofing for wet weather clothing - adds water-repellency and revives breathability to fabrics without wicking liners.

 

Performance:

  • Adds / renews water repellency and revives breathability
  • Prolongs the life of gear and optimises outdoor performance
  • Easy to apply - can be used in a washing machine, no tumble drying required
  • Will not affect cosmetic appearance
  • WaterBased - environmentally friendly, biodegradable, non flammable, non hazardous
  • Does not contain fluorocarbons
  • Guaranteed performance for 4 years from manufacture

 

Ideal For:

  • Clothing with drop liners
  • Microporous coatings
  • Gore-Tex
  • Sympatex
  • eVENT
  • Tripple-Point Ceramic
  • Microfibre fabrics
  • Breathable laminates

 

When to use this product:

After cleaning and re-proofing clothing, maintain its waterproofing qualities by frequent cleaning with Nikwax Tech Wash. After 6 to 8 washes with Nikwax Tech Wash, re-apply Nikwax TX.Direct to re-proof.

Remember you don’t have to wait to dry between cleaning and re-proofing.

 

How To Apply:

For best results remove all non-washable parts and always clean item(s) first with Nikwax® Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing. Shake well before use. Follow care label instructions.

Machine Wash:

  1. Remove all detergent build-up from the detergent dispenser.
  2. Place maximum of 2 clean garments in washing machine.
  3. Use 2 full caps (100ml) per garment.
  4. Run 30° synthetic cycle and slow spin.

Do not machine wash garments if taped seams have become dislodged.*

Hand Wash (use gloves):

  1. Immerse 1 clean garment in 6L of hand-hot water in a bowl or sink.
  2. Add 1 full cap (50ml) of TX.Direct.
  3. Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly.
  4. Rinse with cold water until water runs clear.

Drying: Air dry or tumble dry on a low setting if care label allows. To maintain waterproofing always wash with Nikwax® Tech Wash®. Do not use detergents. *Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying.